Posts

No.76 Branching Out

Image
Some time ago I was asked to provide more details of the current layout. Where to start? I would start with the Branch Terminus. The Branch Terminus – Long Shot 2013 First a little bit of history. Back in the 1960s I didn’t have that much space for a model railway and I had plans and even made the base boards for, a short ‘L’ shaped layout. It would be modelled on one of CJ Freezers suggestions. In this article from August 1961 CJ Freezer took the track diagram from Ashburton (ex GWR) and provided an alternative layout which I have reproduced below. Layout Design based on track diagram from Ashburton (ex GWR) courtesy of CJ Freezer I think this layout is one of the ‘milestones’ in railway modelling and I have thought about it a lot and have extended it and incorporated it into my last two layouts. Branch Terminus – the Park View Layout 1990s The original Ashburton layout has only one platform face and no passing loop. When ‘playing’ trains I always thought t...

No.75 Midland or were they LMS Fowler 4Fs?

Image
Stocks of the latest Bachmann Midland 4Fs have appeared in the shops and I have taken delivery of one of the examples with a Late Crest. Well I have taken delivery of two engines but more of that later. Bachmann Midland 4F on unfitted freight It is now over 100 years since Sir Henry Fowler introduced his 4F goods engine. 192 of these engines were built by the Midland Railway between 1911 and 1922 and according to Casserley and Asher (1961) all these engines were still in service up until May 1954. The ‘Midland’ 4F continued to be constructed by the LMS Railway after grouping. Between 1924 and 1940 a further 580 engines were built giving a final total of 772 engines, the highest of any class in the UK. Casserley and Asher reported that withdrawals of the later engines constructed under LMS ownership did not commence until 1959. The fact that such large numbers of relatively small 0-6-0 goods engines were still being employed in the 1950s has often been used as evidence t...

No.74 A cheap and Cheerful Turntable

Image
A model railway friend has recently upgradedand motorised his kit built turntable. He has used parts formed with a 3D Printer - real cutting edge technology. As a result I have been shamed into refurbishing my hand operated turntable made in the 1980s. Turntable prior to refurbishment In the 1980s there was the Airfix turntable, now marketed by Dapol. This was a plastic kit for an above ground turntable. At the time I thought it a disappointment as it was particularly flimsy and I could not figure out how to make it into a working model. Having discarded the Airfix model, what next? Well there was the Hornby / Triang turntable with its X04 Triang motor. It perhaps lost marks for lack of detail but it did work. Well it moved in fits and starts – and made lots of noise, something my now married daughter is still keen to remind me about! As a child she was lucky enough to have the bedroom right next to the railway room. I would build my own turntable – with a proper we...

No.73 Going backwards – the Hornby 52xx

Image
I recently acquired one of Hornby’s 52xx tank engines to add to my fleet of ex GWR heavy good engines. Hornby 52xx Going Backwards   It is a good looking engine with some very fine detail.   It runs forwards and backwards very smoothly albeit at a prototypical slow speed.   I had to take my glasses off to study the handrails round the bunker – and yes they are individual wires!   I like the full set of brackets on the rear of the bunker visible when using the engine in reverse.   However the footplate on my model is not completely straight – possibly like the prototype!   The footplate appears to be locked to the bunker and side tanks by around eight plastic lugs – I can see me investigating further – but it all looks very delicate! Hornby 52xx Going Forwards   I do sometimes buy things on impulse.   I had been impressed by the preproduction pictures of the model.   However I did not keep up with more recent correspondence...

No.72 All Change – some observations on the new Bachman Sleeping Cars

Image
Back in the early 1970s I was a not infrequent user of the overnight sleeper service from Edinburgh to Kings Cross. I would say not my favourite mode of transport. However I would also say that no 1960s model railway can be complete without some sleeping cars. Bachmann Mk1 Sleeping Cars The date on the solebar shows 1960, which should be ideal for my sixties layout. Hornby Mk1 Sleeping Cars with detailed underframes and fitted with Bachmann bogies. Up until very recently the choice of ready to run model seemed to be limited to the Hornby version. My Hornby sleeping cars dated from the ‘Topshed’ era’ and appeared to be based on the original CKD (Completely Knocked Down) Mk 1 models first made by Triang in the 1960s. The corridor ends and underframes are formed from a single moulding which appears to have been used unaltered for the complete range of Hornby Mk1 coaches. Different coach types having individual side pieces slotted into the solebar and clamped ...

No.71 – So what’s brewing?

Image
A view of the Bachmann Scenecraft Brewery with the local ‘pick up’ goods setting back to pick up some empty coal wagons from the boiler house. Note the trailing connection with the ‘main line’, much safer than facing points? Bachmann Scenecraft Brewery It is summer and rather than completing the scenery effort has gone into brewing real beer and making wine. Is there time to look behind the scenes? Maturing Wine (Rhubarb and Parsnip) We have been making our own ‘country wines’ for over forty years and now seems to be an opportune moment to share some ideas. I think there are no hard and fast rules to making wine. However two books which have provided us with guidance and inspiration are listed below. Sadly both books are probably long out of print. ‘Pick, Cook and Brew – food from the hedgerows’ by Suzanne Beedell, 1975, Mayflower Books Limited. ‘Food for Free – a guide to the edible wild plants of Britain’ by Richard Mabey, 1972, Fontana/Collins   ...